Composite Anchors
Composite Anchor with Stud Bolt and Plate
Composite anchors are made from fibreglass reinforced polyester, with a 3-4mm shell of dyed polyethylene.
The inner layer has a high resistance to chemicals, moisture, vermin and pests, as well as physical impact.
Product Data Sheet PDF
Construction
Composite anchors are made from fibreglass reinforced polyester, completely covered in a 3-4mm thick shell of dyed polyethylene.
The inner layer has a high resistance to chemicals, moisture, vermin and pests, as well as physical impact.
Length
Composite anchors are produced in the following lengths: 0.85m, 1.3m and 2.6m. Other lengths available on request.
Weight
The 0.85m composite anchor weighs approx. 15-30kg, the 1.3m approx. 20-25kg, and the 2.6m approx. 40-50kg. A lower weight makes installation quick and easy.
Load Capacity
The breaking load of the composite anchor is approximately 100kN when coupled with the stud bolt and curved plate.
Installation Depth
Burial and retrieval of the product is carried out using the standard method.
Stud Bolt
A curved square plate (200x200x10mm) is used when affixing the stud bolt.
Environment
Jerol products are the perfect alternative when the installation of creosote impregnated posts is prohibited, according to EU REACH legislation: “… in playgrounds, parks, gardens and outdoor recreation facilities where there is risk of frequent contact with the skin.”
(REACH Chap. 31, Appendix XVII, Regulation (EC) No 1907/2006.)
